IC ADC 24BIT 3CH 20SOIC ADC, Energy Measurement 24 bit SPI 20-SOIC

IC ADC 24BIT 3CH 20SOIC ADC, Energy Measurement 24 bit SPI 20-SOIC

AC Adapter Model: PA-1900-34 Input : 100-240V~1.5A, 50/60Hz Output : 19V 4.74A 90W Connecter size: Int. Diameter: 1.70mm Ext. Diameter: 5.50mm Dimensions: 131 x 58 x 31 mm *Please do not mix up with another adapter with the same model number but different connector size, please check carefully the connector's measurement of your adapter. **When buying any compatible AC adapter, please take note the type of power cord(2 or 3-prong) used. ***Please take note, 3 wire AC power cord not included. AC Adapter Model: PA-1900-34 Input : 100-240V~1.5A, 50/60Hz Output : 19V 4.74A 90W

The Metrel A 1172 is a Luxmeter Sensor used for high-accuracy illuminance measurement e.g. for emergency lightning inspection. This sensor supplied in Type B. The PS/2 sensor is ideal for use with the metrel MI 3105, MI 3102H CL and MI 3102.

KIT DEBUGGER&CURRENT MEASUREMENT - Debugger

Safety 80V (abs max) for Handling Large System Transients 96-Cell, Hot-Plug Guaranteed Performance for Fast Pack Assembly Cell-Reversal Tolerant to Support Fuel Cell Systems ASIL and OBD II Enabling Detection Modes Extensive Pin and Block FMEA-Detection Capability Performance Automotive-Hardened SMBus Ladder Performance Support for Sampling full cell stack, 100x per Second World-Class Accuracy: 0.1% Cell-Reading Error Selectable High-Resolution Mode Matching Current Consumption of ±10% from IC to IC Separate External Cell Balancing Controls Allow Accurate Cell Measurement While Balancing Quality Mature Mixed-Signal Process 100% Wafer Sort with SBL PAT Screening at Package Test

Programmable Output Current in Temperature Measurement Programmable Output Common Mode Voltage Active Guarding On Board Sensor Test Supported by Webench Sensor AFE Designer Supported by Webench Sensor Designer Tools Key Specifications Unless otherwise noted, typical values at TA = 25°C, VS=(VDD-GND) = 3.3V pH Buffer Input bias current (0 INP <3.3V) max @ 25°C: ±125 fA max @ 85°C: ±445 fA pH Buffer Input bias current (-500mV INP-V CM <500mV), V S=(VDD-GND)=0V max @ 25°C: ±600 fA max @ 85°C: ±6.5 pA pH Buffer Input offset voltage: ±200 µV pH Buffer Input offset voltage drift: ±2.5 μV/°C Supply current (pH mode): 50 μA Supply voltage: 1.8 V to 5.5 V Operating temperature range: -40°C to 125°C Package: 16-Pin TSSOP

Safety 80V (abs max) for Handling Large System Transients 96-Cell, Hot-Plug Guaranteed Performance for Fast Pack Assembly Cell-Reversal Tolerant to Support Fuel Cell Systems ASIL and OBD II Enabling Detection Modes Extensive Pin and Block FMEA-Detection Capability Performance Automotive-Hardened SMBus Ladder Performance Support for Sampling full cell stack, 100x per Second World-Class Accuracy: 0.1% Cell-Reading Error Selectable High-Resolution Mode Matching Current Consumption of ±10% from IC to IC Separate External Cell Balancing Controls Allow Accurate Cell Measurement While Balancing Quality Mature Mixed-Signal Process 100% Wafer Sort with SBL PAT Screening at Package Test

The Faber Kabel 031620 is a FRNC Halogen Free and LSOH Control Cable which is ideal for multiple purposes in control and measurement circuits. The cable is resistant against oil and grease.The cable has a fine stranded bare copper conductor, with a grey FRNC-compound HM2 outer sh...

Battery Measurement Li-Ion Automotive 6-Pin DFN EP T/R