应用与设计

Washing Machine (Mid-Range)

详情介绍

Washing Machine (Middle-Range)

Overview

Modern high performance washing machines now have to be eco-friendly electric household appliances, providing modern technology advances that cleans clothes, whilst using less water, less power and are quieter in their operation. Higher specification products also have ion cleaning functions to eliminate odors and the trend towards multifunctional use is set to continue.

A modern washing machine requires a motor that can deliver high torque during the agitation portion of the wash cycle, high-speed rotation during the spin cycle, and a high degree of durability. As some models function not only as washers but as dryers as well, they must also incorporate inverter control technology for the drying function.

Renesas has a wide-ranging lineup of MCUs that enable our customers to develop products that satisfy these requirements. The products in the RX23T Group and the RX24T Group are ideal for use as motor control MCUs, and those in the RX130 Group (for capacitive touch) and the RL78/G13 Group are designed for system control. These MCUs meet a variety of requirements for washing machine control, including wide-range motor torque, rotation rate control, and load variation.

System Block Diagram

Recommended Products

Block Semiconductor Device Recommended Product Name Features, etc.
Operation block Operation MCU RX130 Group Touch key MCU
RL78/L1x Series
RL78/L13 Group
5 V operation, small package, abundant lineup
Reset RNA519xx Series Variable detection voltage
EEPROM
(data correction)
R1EX24xxx Series I 2 C bus interface *1
R1EX25xxx Series SPI bus interface *2
Control block Control MCU RX23T Group Built-in FPU
RX24T Group Built-in FPU, 2 motor control
RL78/G14 Group
RL78/G1F Group
Three-phase PWM timer *3, 5 V operation, small package, abundant lineup
Sensor output Op-amp HA1630xxx Series General use CMOS op-amp, low power
consumption
READ2302GSP Full range output, Low power consumption
μPC358, μPC324 Low power consumption
Comparator HA1631 Series General use CMOS comparator
μPC393 Low power consumption
Valves TRIAC BCR1AM-12A , BCR08AM-14A Up to 60 W/AC 100 V to 120 V
Main motor TRIAC BCR8PM-12LG
BCR10PM-12LG
BCR8PM-14LG
Guaranteed maximum junction temperature of 150℃
Lid lock MOSFET H5N2510DS  
TRIAC BCR1AM-12A Up to 60 W/AC 100 V to 120 V
Inverter IGBT RJL60xx Series , RJH60Dx Series Parasitic Di high-speed trr type
Photocoupler
(IGBT drive)
PS93xx Series
(6/8p-SDIP)
PS94xx Series
(16p-SOP)
PS95xx Series
(8p-DIP)
PS99xx Series
(8p-LSDIP)
High isolation voltage (5kV~7.5kVr.m.s.)
0.6~2.5A output
High CMR (CMR≧50kV/μs)
Power supply PFC IC R2A20114B Continuous conduction mode interleaving
R2A20131 Continuous conduction mode single
R2A20112A Critical conduction mode interleaving
MOSFET RJK60xx 500 V, 600 V tolerance
TRIAC control Photocoupler (standard) PS23xx Series
PS27xx Series
PS28xx Series
High isolation voltage (5kVr.m.s.), 4p-LSOP, Ta=115°C
High isolation voltage (3.75kVr.m.s.), 4p-SOP, Ta=110°C
High isolation voltage (2.5kVr.m.s.), 4p-SSOP, Ta=110°C

*1 I 2 C: Inter-Integrated Circuit
*2 SPI: Serial Peripheral Interface
*3 PWM: Pulse Width Modulation

Related application notes/Sample Code

Name Document No.
R2A20114B application note R03AN0011EJ0100
R2A20131 application note* -
R2A20112A application note R03AN0009EJ0100
Power MOS FET application note REJ05G0001-0200
RX130 Group Initial Setting R01AN2592EJ0200
RX23T Group Initial Settings Example R01AN2551EJ0110
RX24T Group Initial Settings Example R01AN2837EJ0100
RL78/G13 Initialization CC-RL R01AN2575EJ0200
RL78/G13 Serial Array Unit (UART Communication) CC-RL R01AN2517EJ0200
RL78/G1F Serial Array Unit (UART Communication) CC-RL R01AN3314EJ0100
RL78/L12 Serial Array Unit (UART Communication) CC-RL R01AN3316EJ0100
RL78/L1A Serial Array Unit (UART Communication) CC-RL R01AN3484EJ0100
RL78/G14 Timer RD in Complementary PWM Mode CC-RL R01AN2572EJ0200
RL78/G14 Timer RD in Reset Synchronous PWM Mode CC-RL R01AN2506EJ0200
RL78/G14 AD Converter which Uses Timer RJ as Activation Source (SNOOZE mode) R01AN2223EJ0200
RX Family RX Driver Package R01AN3467EJ0111
CS+ Code Generator Tool Integrated Development Environment User's Manual: RX API Reference R20UT3103EJ0130
e2 studio Code Generator User's Manual: RX API Reference R20UT2864EJ0130
CS+ Code Generator Tool Integrated Development Environment User's Manual: RL78 API Reference R20UT3102EJ0104
e2 studio Code Generator Integrated Development Environment User's Manual:RL78 API Reference R20UT3127EJ0104
For application notes about motor control, please see the Motor Control page. -
For application notes about capacitive touch, please see the Capacitive Touch Sensor page. -

*: Please contact your sales representative or contact us directly.

Related Software

Name Document No.
M3S-S2-Tiny sound playback system * -

*: Please contact your sales representative or contact us directly.

Related Boards

Name Part No.
R2A20114B evaluation board * -
R2A20112A evaluation board * -
24V Motor Control Evaluation System for RX23T RTK0EM0006S01212BJ
RX24T CPU Card RTK0EM0009C03402BJ

*: Please contact your sales representative or contact us directly.