| Contact Mating Area Plating Material | Tin |
| Circuit Application | Power |
| Seal Type | - |
| Housing Material | High Temperature Nylon |
| Backwall/Post Interruptions | - |
| Contact Type | Pin |
| Number of Power Positions | 4 |
| Contact Base Material | - |
| Special Features | - |
| Glow Wire Rating | Standard Part - Not Glow Wire |
| Panel Thickness | - |
| Mating & Unmating Configuration | - |
| Connector Circuit Configuration (Number of Pos/Type) | - |
| Boardlock Material | Phosphor Bronze |
| Insulation Resistance | - |
| Connector Mounting Type | Board Mount |
| Number of Active Positions | - |
| End Node Category | Rectangular Power Connectors |
| UL Flammability Rating | UL 94V-0 |
| Contact Termination Area Plating Material | Tin |
| Contact Termination Area Plating Thickness | 100 |
| CSA File Number | LR7189 |
| Cable Exit Angle | - |
| Contact Size | - |
| Mating Retention Type | Locking Tab |
| Mating Post Length | - |
| CSA Rating | Certified |
| Contact Retention Type | - |
| Circuit Identification Feature | - |
| Power Contact Material | - |
| Contact Design | - |
| Tab Width | - |
| Contact Layout | - |
| Solder Process Feature | - |
| Agency/Standard | UL |
| Wire & Cable IDC Installation Type | - |
| Connector System | Wire-to-Board |
| TE Internal Number | 3-794624-4 |
| Housing Style | - |
| Glow Wire Material Rating | - |
| Width | 6.86 |
| Mating Alignment | With |
| Wire/Cable Size | 100.5 – 1022 |
| Termination Post & Tail Length | .125 |
| Contact Termination Area Plating Finish | Matte |
| Number of Positions | 4 |
| Operating Temperature Range | -40 – 105 |
| Insulation Diameter (Max) | 1.52 |
| PCB Mount Retention | With |
| Strain Relief | Without |
| Length | 6.86 |
| Multiple Contact Types | Without |
| Backwall Interruptions Between Posts | - |
| Housing Color | Black |
| Underplate Material Thickness | - |
| Mating Retention | With |
| Post Numbers Omitted | - |
| Row-to-Row Spacing | .118 |
| Keying | - |
| Connector & Contact Terminates To | Printed Circuit Board |
| Contact Retention | Without |
| Sealable | No |
| Termination Method to Wire & Cable | - |
| Position Locations Loaded | - |
| Shielded | - |
| Contact Current Rating (Max) | 5 |
| Wire Type | - |
| Panel Mount Feature | Without |
| Wire/Cable Type | - |
| Header Type | - |
| Operating Voltage | 250 |
| Mating Alignment Type | Polarization |
| PCB Thickness (Recommended) | 1.57 |
| Packaging Quantity | 150 |
| Accepts Cable Diameter (Max) | - |
| Assembly Integration Feature | - |
| Position Locations Omitted | - |
| PCB Mount Alignment | Without |
| Screw & Hole Thread Size | - |
| Number of Signal Positions | - |
| Wire Color | - |
| Contact Mating Area Plating Material Finish | - |
| Brand | AMP |
| UL Rating | Recognized |
| Number of Columns | - |
| PCB Mount Orientation | Right Angle |
| Product Type | Header |
| Contact Mating Area Plating Thickness | 100 – 300 |
| Contact Underplating Material | - |
| PCB Mount Retention Type | Boardlock |
| Stacking Configuration | - |
| Housing Type | Plug |
| Panel Mount Feature Type | - |
| Number of Loaded Positions | - |
| Insertion Force | - |
| Number of Blocked Positions | - |
| Board-to-Board Configuration | - |
| Assembly or Kit | - |
| VDE Tested | Yes |
| Height | 8.11 |
| Interface Type | - |
| Comment | - |
| Number of Rows | 2 |
| For Use With | - |
| Right Angle Bending Side | - |
| Agency/Standard Number | E28476 |
| Centerline (Pitch) | .118 |
| Dielectric Withstanding Voltage (Max) | - |
| Termination Method to Printed Circuit Board | Surface Mount |
| Assembly Process Feature | - |
| Number of Modules | - |
| Signal Contact Base Material | - |
| PCB Mount Alignment Type | - |
| Packaging Method | Tray |
| Accepts Wire Insulation Diameter Range | - |
TE 微信客服
TE Connectivity
