| Contact Mating Area Plating Material | Tin |
| Circuit Application | Signal |
| Number of Insulation Displacement Slots | 2 |
| Housing Material | PA 6.6 |
| PCB Tail Length | - |
| Contact Type | Socket |
| Position Keyed | - |
| Number of Power Positions | 2 |
| Contact Base Material | CuNiSi |
| PCB Contact Termination Area Plating Material | - |
| Solder Tail Contact Plating Material Finish | - |
| Connector Mounting Type | Cable Mount |
| Keying Rib Location | - |
| End Node Category | Standard Edge Connectors |
| Daughter Board Thickness | - |
| Signal Contact Material | - |
| UL Flammability Rating | UL 94V-0 |
| Contact Termination Area Plating Material | Tin |
| Contact Termination Area Plating Thickness | - |
| Cable Exit Angle | 90° |
| CSA File Number | - |
| Mating Retention Type | - |
| Termination Post Length | - |
| Contact Transmits (Typical) | Power |
| Contact Retention Type | Locking Lance |
| Post Plating Material Finish | - |
| Shape | - |
| Power Contact Material | - |
| Contact Design | - |
| Pre-Assembled | Yes |
| Standoffs | Without |
| Profile | Standard |
| Agency/Standard | UL |
| Connector System | Wire-to-Board |
| TE Internal Number | 1394918-2 |
| Number of Pylons | - |
| Housing Style | Closed End |
| Connector Type | Connector Assembly |
| Preloaded | Yes |
| High Current | - |
| Mating Alignment | Without |
| Wire/Cable Size | 22 – 20 |
| Width | - |
| End Caps | Without |
| Number of Positions | 2 |
| Operating Temperature Range | -40 – 110 |
| Signal Contact Plating Material | - |
| Post Plating Thickness | - |
| PCB Mount Retention | Without |
| Connector Design | - |
| Locking Clip Location | None |
| Card Entry Style | Side |
| Bus Type | - |
| Length | - |
| Housing Color | Gray |
| Post Styles | - |
| Mating Retention | With |
| Row-to-Row Spacing | - |
| Keying Plug Material | - |
| Connector & Contact Terminates To | Printed Circuit Board |
| Accepts Card Thickness | - |
| Contact Retention | With |
| Connector Contact Load Condition | Fully Loaded |
| Termination Method to Wire & Cable | Insulation Displacement Crimp (IDC) |
| Contact Current Rating (Max) | 6 |
| Panel Mount Feature | Without |
| Wire/Cable Type | Stranded |
| Operating Voltage | 250 V |
| Mating Alignment Type | - |
| PCB Thickness (Recommended) | .059 |
| Packaging Quantity | 3850 |
| Position Locations Omitted | - |
| PCB Mount Alignment | With |
| Tail Length | - |
| Post Plating Material | - |
| Color | Gray |
| Keying Between Cavity Numbers | - |
| Contact Mating Area Plating Material Finish | - |
| Brand | AMP |
| PCB Mount Orientation | Right Angle |
| Product Type | Connector |
| Connector Style | Receptacle |
| Contact Underplating Material | - |
| Contact Mating Area Plating Thickness | 196.849 – 472.439 |
| PCB Mount Retention Type | - |
| Panel Mount Feature Type | - |
| 端子端接区域电镀厚度 | - |
| Hot Pluggable | No |
| Board-to-Board Configuration | - |
| Mounting Ear Insert Material | - |
| Mounting Ear Position | - |
| Accepts Card Width | - |
| Height | .287 |
| PCB テール長 | - |
| Comment | - |
| Number of Rows | 1 |
| Internal/External | - |
| For Use With | Tab Header |
| Type of Connector | Card Edge |
| Card Slot Depth | - |
| Centerline (Pitch) | 5 |
| Material | - |
| PCB Contact Termination Area Plating Material Finish | - |
| Termination Method to Printed Circuit Board | - |
| Post Alignment | - |
| PCB Retention Location | - |
| UL Voltage Rating | 250 |
| Post Type | - |
| Packaging Method | Tray |
| Number of Dual Positions | - |
| Accessory Type | - |
| Mounting Ear Style | - |
| Accepts Wire Insulation Diameter Range | .047 – .055 |
TE 微信客服
TE Connectivity
