| Thread Quantity Per Inch | 32 |
| Thread Series Designator | uns |
| Center To Center Distance Between Terminals Parallel To Length | 0.703 inches nominal |
| Maximum Interrupting Capacity Current Type And Rating Per Pole In Amps | 800.0 ac single location and 2000.0 dc single location |
| Reset Method | manual |
| Circuit Protection Type | overcurrent single location |
| Manual Actuator Type And Quantity | 1 push-pull |
| Pole Quantity | 1 |
| Special Features | ampere marked on actuator |
| Trip Release Ambient Temp Rating | 25.0 deg celsius nominal single location |
| Mounting Facility Type And Quantity | 1 threaded bushing |
| Actuator Function | trip-reset |
| Operating Voltage Type And Rating Per Pole In Volts | 120.0 ac single location and 28.0 dc single location |
| Body Length | 0.750 inches nominal |
| Fragility Factor | moderately rugged |
| Trip Release Method | thermal single location |
| Actuator Position Designation | at pole one |
| Ultimate Trip Rating Of Continuous Current Rating Per Pole In Percent | 145.0 single location |
| Main Contact Tripping Mechanism Type | trip free |
| Case Material | plastic |
| Inclosure Protection Type For Which Designed | corrosion resistant and sand resistant |
| Trip Release Characteristic | time delay single location |
| Frequency In Hertz | 400.0 single location |
| Terminal Type And Quantity | 2 tab w/screw |
| Nominal Thread Size | 0.469 inches |
| Bushing Length | 0.250 inches nominal |
| Mounting Surface To Terminal End Distance | 1.707 inches nominal |
| Body Width | 0.562 inches nominal |
| Body Style | single pole type |
| Trip Delay Time In Seconds Per Rated Continuous Current | 2.000 minimum at 200 pct single location and 20.000 maximum at 200 pct single location |
| Arc Quenching Method | air |
| Maximum Continuous Load Current Rating Per Pole | 2.0 amperes ac single location and 2.0 amperes dc single location |
| Storage Type | general purpose warehouse |
| Internal Trip Release Configuration | series trip single location |
