| Wire Stripping (Size 15/15s/16/16s): | 6,2 mm |
| Contact Resistance (Size 15/15s/16/16s): | 6 mΩ |
| Shell Style: | Plug, straight |
| Insulator And Grommet Material: | CR-Elastomere |
| Gender: | Pin |
| Harnessing Info: Contact Cross-Section: | See assembly instruction |
| Endbell Style: | Endbell with clamp and bushing (w/o grommet and ferrule) |
| Operating Voltage: | In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. |
| Alias/AKA: | CA06COM-E28-12P-01 |
| Number of Contacts: | 26 contacts size 16 |
| Sep# Force Per Contact (Size 15/15s/16/16s): | 1,0 N |
| Shell Size: | 28 |
| Test Voltage: | 1600 Vrms |
| Contact Arrangement: | 28-12 |
| Shell Material: | Aluminium alloy |
| Supplier: | ITT CANNON |
| Air And Creepage Paths (Min): | 1,1 mm |
| Ambient Temperature: | Standard insulator material -55°/+125°C (-67/257°F) |
| Contact Material: | Copper Alloy |
| Contact Rating At +20 °c (68 °f) (Size 15/15s/16/16s): | 22 A |
| Contact Retention (Size 15/15s/16/16s): | 35 N |
| Coupling Torque: | Closing: 7 Nm max / Opening: 0,92 Nm min |
| Shell Plating: | Nickel plated |
| RoHS: | Yes |
| Contact Type: | Metric Crimp |
| Thread: | Connector with threaded coupling |
| Harnessing Info: Insulator Diameter: | See assembly instruction |
| Mating Cycles: | 500 min |
| Contact Plating: | Hard silver |
| Insulator Resistance: | ≥1000 MΩ |
| Gauge: | For infos on Gauge please see catalog VG95234, part 1 |
| Unit of Measure: | Per Each |
| Part No: | 121485-0016 |
| Supplier Standard Pack: | 1 |
| Contacts Installed: | not assembled, packed separately |
| General Info: | All tests in accordance with VG95319 and/or if applicable with VG95210 except salt spray resistance and heat and humidity endurance test |
