| Terminal Location | radially positioned over less than half the circumference |
| Features Provided | switch |
| Test Data Document | 70210-805360 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) |
| Maximum Stop Torque | 20.00 inch-ounces |
| Overall Diameter | 1.880 inches maximum |
| Shaft End Play | 0.005 inches |
| Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 125.0 all sections |
| Body Length | 1.880 inches maximum |
| Body Diameter | 1.445 inches maximum |
| Actuator Travel Control Feature | stops |
| Shaft Bearing Type | ball |
| Switch Operating Position | any position of rotation travel |
| Shaft Style | round |
| Undercut Width | 0.0570 inches minimum |
| Lateral Runout | 0.002 inches |
| Undercut Diameter | 1.310 inches maximum |
| Maximum Running Torque | 2.60 inch-ounces |
| Mounting Method | clamp ring |
| Mounting Lip Diameter | 1.4320 inches minimum and 1.4420 inches maximum |
| Switch Current Type And Rating In Amps | 0.003 dc |
| Mounting Lip Depth | 0.0570 inches minimum and 0.0670 inches maximum |
| Pilot Length | 0.0570 inches minimum and 0.0670 inches maximum |
| Switch Voltage Rating In Volts | 30.0 |
| Reliability Indicator | not established |
| Electrical Resistance Per Section | 2.9 percent, rated amperes c and better industrial clears |
| Section Quantity | 2 |
| Pilot Diameter | 0.9995 inches minimum and 1.0000 inches maximum |
| Maximum Starting Torque | 2.60 inch-ounces |
| Rotary Actuator Travel In Angular Deg | 349.368 nominal |
| Mechanical Backlash In Deg Angular Rotation | 0.1 |
| Shaft Length | 0.550 inches minimum and 0.570 inches maximum |
| Function Characteristic Per Section | all sections linear |
| Pilot Diameter Runout | 0.001 inches |
| Unpackaged Unit Weight | 182.0 grams |
| Actuator Type | single shaft |
| Power Dissipation Rating Per Section In Watts | 1.5 free air all sections |
| Terminal Type And Quantity | 8 turret |
| Overall Length | 2.450 inches maximum |
| Shaft Diameter | 0.1869 inches minimum and 0.1872 inches maximum |
| Switch Type | rotary |
| Function Conformity Tolerance Per Section | -0.0007/+0.0007 2nd section |
| Function Conformity Per Section | all sections absolute conformity |
| Shaft Runout | 0.002 inches |
| Switch Contact Arrangement | single pole, single throw, normally open, both positions maintained |
| Resistance Tolerance Per Section In Percent | -2.0/+2.0 all sections |
| Body Style | cylindrical servo mounted |
| Ambient Temp In Deg Celsius Per Section At Full Rated Power | 70.0 all sections |
| Effective Electrical Rotation In Deg Angular Rotation | 343.368 nominal |
| Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius | -400.0/+400.0 all sections |
