| Precious Material | silver |
| Shaft Flat/slot Angular Location | 270.0 degrees from nonturn device single actuator |
| Contact Load Current Rating | 10.0 milliamperes resistive load ac at sea level |
| Err Default | err default and err default |
| Nonturn Device Radius | 0.370 inches minimum at 3:00 o'clock and 0.380 inches maximum at 3:00 o'clock |
| Thread Series Designator | unef single mounting facility |
| Individual Section Quantity | 1 |
| Thread Class | 2a single mounting facility |
| Overall Diameter | 0.985 inches minimum and 1.015 inches maximum |
| Switch Actuator Positioning Increment | 30.0 degrees single actuator |
| Pole Quantity | 3 single section rear |
| Shaft Length | 0.735 inches minimum single actuator and 0.765 inches maximum single actuator |
| Contact Voltage Rating In Volts | 115.0 ac at sea level |
| Switch Actuator Stop Device Type | fixed stop single actuator |
| Switch Contact Basic Design | nonpile-up symmetrical |
| Operating Temp Range | -65.0/+125.0 deg celsius |
| Shaft Type | round, flatted single actuator |
| Terminal Type | tab, solder lug |
| Shaft Diameter | 0.247 inches minimum single actuator and 0.250 inches maximum single actuator |
| Overall Length | 2.756 inches maximum |
| Nominal Thread Size | 0.375 inches single mounting facility |
| Precious Material And Location | contacts and rotor blades silver |
| Mounting Method | threaded bushing single mounting facility |
| Flat Height | 0.203 inches minimum single actuator and 0.233 inches maximum single actuator |
| Nonturn Device Type | pin at 3:00 o'clock |
| Switch Actuator Indexing Position Quantity | 3 single actuator |
| Style Designator | circular wafer, bushing mount |
| Contact Switching Action | breaks before makes single section rear |
| First Flat Length | 0.235 inches minimum single actuator and 0.265 inches maximum single actuator |
| Throw Quantity | 3 single section rear |
