| Terminal Location | lower adjacent side two rows |
| Section Quantity | 1 |
| Electrical Resistance Per Section | 50.0 ohms single section |
| Standard Taper Curve Per Section | a single section |
| Center To Center Distance Between Center Terminal And Outside Terminal | 0.200 inches nominal |
| Rotary Actuator Travel In Angular Deg | 7200.0 nominal |
| Ambient Temp In Deg Celsius Per Section At Zero Percent Rated Power | 125.0 single section |
| Shaft Length | 0.075 inches maximum |
| Body Length | 0.740 inches minimum and 0.760 inches maximum |
| Actuator Travel Control Feature | clutch |
| Shaft Style | round, slotted |
| Actuator Type | single shaft |
| Power Dissipation Rating Per Section In Watts | 0.75 free air single section |
| Terminal Type And Quantity | 3 pin |
| Shaft Diameter | 0.110 inches maximum |
| Mounting Method | terminal |
| Body Width | 0.155 inches minimum and 0.200 inches maximum |
| Resistance Tolerance Per Section In Percent | -10.0/+10.0 single section |
| Terminal Length | 0.175 inches minimum |
| Body Style | rectangular |
| Center To Center Distance Between Terminal Rows | 0.100 inches nominal |
| Center To Center Distance Between Terminals | 0.500 inches nominal |
| Body Height | 0.335 inches minimum and 0.360 inches maximum |
| Ambient Temp In Deg Celsius Per Section At Full Rated Power | 70.0 single section |
| Effective Electrical Rotation In Deg Angular Rotation | 7200.0 nominal |
| Reliability Indicator | not established |
| Temp Coefficient Of Resistance Per Section In Ppm Per Deg Celsius | -100.0/+100.0 single section |
