| Width (mm) | 5.46 |
| IsVisisble | True |
| Electrically Insulating | Electrically insulating |
| Material Type | Hardware |
| Width (in.) | 0.215 |
| Material | Polyphenylene Sulfide |
| Full Part Number | 7721-7PPSG |
| Available in Custom Shapes | No |
| Thickness (mm) | 1.83 |
| RoHS | Compliant |
| Length (in.) | 0.215 |
| Part Number Add Ons | 7721-7PPSG |
| Cooling Type | Passive Air, Active Air |
| Max Temperature (°C) | 260 |
| Length (mm) | 5.46 |
| Product Description | Shoulder Washers are utilized in mounting assemblies to evenly distribute the load generated by a spring. The recommended torque on these washers is between 0.565Nm to 0.678Nm (5 to 6 inch-pounds) except -7, which has recommended torque of 0.452Nm (4 inch-pounds).
Chemically inert [no known solvents under 200°C (392°F)]
7721-7PPSG is a Polyphenylene Sulfide shoulder washer with a Outer Diameter (OD) of 5.46 mm, a shoulder diameter of 6.23 mm, an Inner Diameter (ID) of 3.97 mm through hole, and a total height of 1.83 mm. This part was formerly known as Motorola part number B51547F003. |
| Product Details | Outer Diameter (OD): 5.46 mm (0.21 in.)
Inner Diameter (ID): 3.97 mm (0.117 in.)
Shoulder Diameter: 6.23 mm (0.245 in.)
Flange Thickness: 1.19 mm (0.047 in.)
Thickness: 1.83 mm (0.072 in.)
Material: Polyphenylene Sulfide
Maximum Temperature: 260°C
RoHS: Compliant |
| Thickness (in.) | 0.072 |
