| Width (mm) | 5.84 |
| IsVisisble | True |
| Electrically Insulating | Electrically insulating |
| Material Type | Hardware |
| Device Type | TO-18, TO-5 |
| Width (in.) | 0.23 |
| Material | Diallyl Phthalate |
| Full Part Number | 7717-137DAPG |
| Available in Custom Shapes | No |
| Thickness (mm) | 2.54 |
| RoHS | Compliant |
| Length (in.) | 0.23 |
| Part Number Add Ons | 7717-137DAPG |
| Cooling Type | Passive Air, Active Air |
| Max Temperature (°C) | 204.4 |
| Length (mm) | 5.84 |
| Product Description | Transistor Mounting Pads prevent heat damage during soldering. Assembled on the board with electronic devices before soldering, these pads facilitate board clean-up, prevent solder bridges, and assure uniform device height.
7717-137DAPG is a lead conversion mounting pad for switching a TO-18 spacing to a TO-5 device lead spacing that is 5.8 mm long x 5.8 mm wide x 2.54 mm thick. This configuration allows for 4 leads and meets UL 94V-0. |
| Product Details | Length: 5.8 mm (0.23 in.)
Width: 5.8 mm (0.23 in.)
Thickness: 2.54 mm (0.1 in.)
Number of Leads: 4
Device: TO-18, TO-5
Material: Diallyl Phthalate (per per MIL-M-14G Type SDG)
Color: Black
Maximum Continuous UseTemperature: 204.4°C (400 °F)
Deflection Temperature: 282 °C (540°F)
Flammability Rating: UL 94 V-0
RoHS: Compliant |
| Thickness (in.) | 0.1 |
