| FCC surge voltage between open contacts | 1,500 V |
| Nominal switching capacity (resistive load) | 1 A 30 V DC, 0.5 A 125 V AC |
| Expected life (min.operations) - Electrical (at 20 cpm) | 1 A 30 V DC resistive - 2�10^5, 0.5 A 125 V AC resistive - 10^5 |
| Operate time [Set time] (at 20�C) | Max. 3 ms (Approx. 2 ms) [Max. 3 ms (Approx. 2 ms)] |
| Unit weight | Approx. 3 g .106 oz. |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Humidity | 5 to 85% R.H. |
| Expected life (min.operations) - Mechanical (at 180 cpm) | 10^8 |
| Nominal operating current, (�10%) | 16.7 mA |
| Vibration resistance - Destructive | 294 m/s2 {30G}, 10 to 55 Hz at double amplitude of 5 mm |
| Max. switching power (resistive load) | 30 W, 62.5 V A |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Ambient temp. | �40°C to +70°C, �40°F to +158°F |
| Nominal operating power | 400 mW |
| Initial breakdown voltage - Between open contacts | 750 Vrms for 1 min. (Detection current:10 mA) |
| Temperature rise (at 20�C) | Max. 50°C |
| Max. switching current | 1 A |
| Min. switching capacity | 10 ?A 10 mV DC |
| M.B.B. time | n/a |
| Contact material | Gold-clad silver alloy |
| Vibration resistance - Functional | 176.4 m/s^2 {18G}, 10 to 55 Hz at double amplitude of 3 mm |
| Reset voltage, (max.) (initial) | 18 VDC |
| Max. switching voltage | 110 V DC, 125 V AC |
| Shock resistance - Destructive | Min. 980 m/s^2 {100G} |
| Set voltage, (max.) (initial) | 18 VDC |
| Mounting | PC Board |
| Operating Function | 2 Coil Latching |
| Type | Standard (B.B.M.) type |
| Initial insulation resistance | Min. 10,000M ohm (at 500V DC) |
| Contact Configuration | 4C 4PDT |
| Release time [Reset time] (at 20�C) | Max. 3 ms (Approx. 1 ms) [Max. 3 ms (Approx. 2 ms)] |
| Initial breakdown voltage - Between contact sets | 1,000 Vrms for 1 min. (Detection current: 10 mA) |
| Max. allowable voltage | 36 VDC |
| Sub Category | Signal Relay |
| Coil Voltage | 24 VDC |
| Main Category | Relays |
| Coil resistance, (�10%) | 1440 ohm |
| Shock resistance - Functional | Min. 490 m/s^2 {50G} |
| Current | 1 Amp |
| Initial breakdown voltage - Between contact and coil | 1,000 Vrms for 1 min. (Detection current: 10 mA) |
| Initial contact resistance, max. (By voltage drop 6 V DC 1A ) | 50 mohm |
