| Nominal switching capacity (resistive load) | 2 A 30 V DC, 0.5 A 125 V AC |
| Expected life (min.operations) - Electrical (at 20 cpm) | 2 A 30 V DC resistive - 10^5, 1 A 30 V DC resistive - 2�10^5, 0.5 A 125 V AC resistive - 10^5 |
| Operate time [Set time] (at 20�C) | Max. 4 ms (Approx. 2 ms) [Max. 4 ms (Approx. 2 ms)] |
| Unit weight | Approx. 2 g .071 oz |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Humidity | 5 to 85% R.H. |
| Initial surge voltage - Between open contacts (10�160 ?s) | 1,500 V (FCC Part 68) |
| Expected life (min.operations) - Mechanical (at 180 cpm) | 10^8 |
| Nominal operating current, (�10%) | 46.7 mA |
| Initial surge voltage - Between contacts and coil (2�10 ?s) | 2,500 V (Telcordia) |
| Vibration resistance - Destructive | 294 m/s^2 {30G}, 10 to 55 Hz at double amplitude of 5 mm |
| Max. switching power (resistive load) | 60 W, 62.5 VA |
| Conditions for operation, transport and storage (Not freezing and condensing at low temperature) - Ambient temp. | �40°C to +85°C, �40°F to +185°F |
| Nominal operating power | 140 mW (1.5 to 12 V DC) , 200 mW (24 V DC), 300 mW (48 V DC) |
| Initial breakdown voltage - Between open contacts | 1,000 Vrms for 1 min. (Detection current: 10 mA) |
| Temperature rise (at 20�C) | Max. 50°C |
| Max. switching current | 2 A |
| Min. switching capacity | 10 ?A 10 mV DC |
| Contact material | Gold-clad silver alloy |
| Vibration resistance - Functional | 200 m/s^2 {20G}, 10 to 55 Hz at double amplitude of 3.3 mm |
| Drop-out voltage, (min.) (initial) | 0.3 VDC |
| Max. switching voltage | 220 V DC, 125 V AC |
| Shock resistance - Destructive | Min. 1,000 m/s^2 {100 G} |
| Mounting | SMD |
| Operating Function | Single Side Stable |
| Initial insulation resistance | Min. 1,000 Mohm (at 500 V DC) |
| Contact Configuration | 2C DPDT |
| Release time [Reset time] (at 20�C) | Max. 4 ms (Approx. 1 ms) [Max. 4 ms (Approx. 2 ms)] |
| Initial breakdown voltage - Between contact sets | 1,500 Vrms for 1 min. (Detection current: 10 mA) |
| Pick-up voltage, (max.) (initial) | 2.25 VDC |
| Max. allowable voltage | 4.5 VDC |
| Sub Category | Signal Relay |
| Coil Voltage | 3 VDC |
| Packaging | Tape and reel packing |
| Main Category | Relays |
| Coil resistance, (�10%) | 64.3 ohm |
| Shock resistance - Functional | Min. 750 m/s^2 {75 G} |
| Current | 2 Amps |
| Initial breakdown voltage - Between contact and coil | 1,500 Vrms for 1 min. (Detection current: 10 mA) |
| Initial contact resistance, max. (By voltage drop 6 V DC 1A ) | 75 mohm |
