| Functional Vibration resistance | 176.4 m/s^2 {18 G}, 10 to 55 Hz at double amplitude of 3 mm |
| Maximum allowable voltage (40�C) | 11 VDC |
| Release time (without diode) (at nominal voltage)(at 20�C) | Max. 10 ms (Approx. 5 ms) |
| Nominal switching capacity | 4 A 250 V AC, 3 A 30 V DC |
| Nominal operating current, (�10%) | 33.3 mA |
| Inductance | 93 mH |
| Reset time (latching) (at nominal voltage)(at 20�C) | Max. 15 ms (Approx. 8 ms) |
| Expected life (min. operations) - Electrical (at 20 cpm) | A 250 V AC: 10^5; 3 A 30 V DC: 2 � 10^5 |
| Max. operating speed | 20 cpm for maximum load, 50 cps for low-level load (1 mA 1 V DC) |
| Nominal operating power | 200 mW |
| Expected life (min. operations) - Mechanical (at 50 cps) | 10^8 |
| Initial contact resistance, max. (By voltage drop 6 V DC 1 A) | 50 mohm |
| Initial breakdown voltage - Between open contacts | 750 Vrms |
| Operate time (at nominal voltage)(at 20�C) | Max. 15 ms (Approx. 8 ms) |
| Max. switching current | 4 A (AC), 3 A (DC) |
| Initial contact pressure | Approx. 12 g .42 oz |
| Min. switching capacity | 100?A 100 m V DC |
| Thermal electromotive force (at nominal coil voltage) | Approx. 3?V |
| Temperature rise (at nominal voltage)(at 20�C) | Max. 35�C with nominal coil voltage and at maximum switching current |
| Initial contact bounce, max. | 1 ms |
| Contact material | Gold clad silver alloy |
| Classification of type | Amber sealed type |
| Electrostatic capacitance | Approx. 3pF |
| Max. switching power | 1,000 VA, 90 W |
| Max. switching voltage | 250 V AC, 30 V DC (48 VDC at less than 0.5 A) |
| Initial breakdown voltage - Between contacts and coil | 1,500 Vrms |
| Destructive Shock Resistance | Min. 980 m/s^2 {100 G} |
| Set time (latching) (at nominal voltage)(at 20�C) | Max. 15 ms (Approx. 8 ms) |
| Mounting | PC Board |
| Operating Function | Single Side Stable |
| Initial insulation resistance | 10,000 Mohm at 500 V DC |
| Pick-up voltage (max.) | 4.2 VDC |
| Contact Configuration | 2A+2B DPST-NO+DPST-NC |
| Initial breakdown voltage - Between contact sets | 1,000 Vrms |
| Drop-out voltage (min.) | 0.6 VDC |
| Functional Shock Resistance | Min. 490 m/s^2 {50 G} |
| Sub Category | General Purpose Relay |
| Coil Voltage | 6 VDC |
| Main Category | Relays |
| Coil resistance, (�10%) | 180 ohm |
| Current | 4 Amps |
